Yey! Origami Timeline: Year-End Review (2014)

January 17: Fish (Vinko)
January 30: Crease Pattern for Flowing Rivers Tessellation (My Design)
February 13: Smart Waterbomb (Chapman-Bell)
February 14: Geometric Flower (Guarnieri)
February 22: Star Doris (Ennen), Butterfly (Giunta)
March 21: Snail (Komatsu)
April 3: Pelleas Box (Keller)
April 12: Spring Into Action (Beynon)
April 30: Nobuko's Puff Ring / December Decoration (Okabe, Meeusen)
May 17: Starry Fields Tessellation (Manaois)
July 11: Tarantula (Lang)
July 12: Geometric Bird (Diaz)
September 19: Beetle (Nakashima)
October 25: 12-Point Star (Keller)
December 15: Stella Pitti (Mancini)
December 16: Stern Franziska (Sprung)
December 17: Stern Clarissa (Sprung)
December 18: Sonobe Polyhedra (Sonobe)
December 19: Pine Cone (Petty)
December 20: Flower For Rose (Scott)
December 21: Snowflake (Walker), Origami A Day changes name to Yey! Origami
December 22: Snowflake (Wu)
December 23: Wreath (Scott)
December 24: Christmas Tree (Guarnieri)
December 30: Regal Tessellation (My Design), Flower Tower (Palmer)
December 31: Fuufuki Asagao Kusudama (Fuse), Year Review (THIS POST)

HAPPY NEW YEAR TO ALL!!! 
-ABonymous-

ふうふき あさがお くすだま

This is the Fuufuki Asagao Kuduama designed by Tomoko Fuse. The diagrams can be found in Fuse's book "Unit Origami Fantasy".

The kusudama looks very cute at first glance. It looks also very clean and simple. But, a very big problem about this model is the locking mechanism. Expect that you will have lots of trouble assembling the model since the units separate very easily.

It also is fragile unlike other kusudamas. Just after examining the photos I took below, I turn around and BAM! the kusudama is on the floor and in pieces. It was the third time it shattered into the 30 units that make up the model. I had to resort to using glue to make the model sturdy, and every origami artist knows that GLUING is a mortal sin in the divine laws of origami...

But anyways, it is still a cute model, and it is my second legit kusudama after folding Sinayskaya's Stilleto Star for the 2014 International Origami Internet Olympiad.

Happy New Year!
-ABonymous-

Flower Tower

This is a design by Chris Palmer. Jeremy Shafer posted a tutorial of this model on Youtube with the teacher being Chris Palmer himself.

Do you experience situations where you do not have the required size of paper for a model so you just have to be content about using a smaller sheet and therefore having a smaller-than-normal product? That is what I felt...The model really consumes paper when it comes to size and I only have a square piece at least 8.5 inches on each side. I really needed the metal stick mail opener I bought from S. Korea to finish the top layer.

If you want a model with many more layers, it's best to use paper with dimensions 12 inches x 12 inches or larger. Just imagine the 8.5 inch x 8.5 inch paper I used shrunk to a mere approximately 2 inches of diameter.

The usual Flower Tower starts from a dodecahedron base (the paper can still be square) but there are other versions, with models folded from octagon-based folds, and even hexagon and pentagon bases.

What stands out with this model is that it has different firework-like layers than can jut out and flatten when folded correctly. It is not an easy model, though. The squishing of the cylinder-like structure midway through the  process can also be difficult unless the folds were done accurately or properly.

Happy New Year!

-ABonymous-

Regal Tessellation

Wow...I missed designing tessellations! So, just after Christmas I made the Regal Tessellation.
I decided to name it "Regal" since I see many patterns like these on crowns, royal garments, and others.

It is folded from somewhat construction-like yellow paper with a grid of 32 by 32.
I also have a gift for all of you! A Christmas-New Year gift!

I really hope the crease pattern is understandable. It's difficulty is intermediate, though it is not the simple "pleat-twist" like tessellation.

Happy Holidays!

Christmas Tree

It's already December 24! The next day will be Christmas, so...

 1

This is an origami Christmas Tree designed by Francesco Guarnieri. The diagrams are in http://guarnieri-origami.blogspot.it/2012/11/bialbero-di-natale-multialbero.html with additional clues for instruction at http://goorigami.com/modular-origami/origami-christmas-tree/1960 .

It is a multi-piece origami model which will lovely sit on your table during the holidays! (or any time if it is your "trip"). Why did I say "multi-piece" not modular? A multi-piece model is made of more than one piece of paper. A modular model us a subcategory of the multi-piece model wherein the units of the model are the same. This Christmas tree, although it has units similar to each other, the sizes are quite different (difference: at least 2 cm).

Merry Christmas to all of you!

-ABonymous=

Wreath

2

This is an origami (Christmas?) wreath designed by Darren Scott, with diagrams published in Everything Origami (Gardiner).

This model, containing 6 units, is actually very easy to create (if you see the diagrams...it is easy to reverse-engineer this model though). Make lots of it and use it to decorate your home! (Make sure to use red and green paper for this model to create a "Christmas theme" with this model.)

Happy Holidays!

-ABonymous-

Snowflake v. 2

3

Sorry that I am featuring a snowflake again for this countdown, but the original model got destroyed by accident and I have to make a new one for just a short period of time. Anyways, it is still related to Christmas. 

This particular snowflake model, designed by Joseph Wu, resembles less of the stereotypical snowflake than the one in the previous post (d. b. Walker) but it's still pretty, nevertheless. Remember the fact that every (real) snowflake is unique, and no two snowflakes are exactly alike! Surely there's a snowflake that resembles this pattern, right? I think I saw one on Google.

This model is one of the "looks best with translucent paper" type.

I am honest to say that there are tricky parts in making this model...well probably because I used parchment paper again. I have not bought tracing paper yet and I am still counting the seconds until I get to buy tracing paper. Well I still have yet to post a back lighted photo of this model for a stupid reason...hopefully I will be able to post it tomorrow...

Here are the diagrams to the model (c. 1997) http://www.josephwu.com/Files/PDF/snowflake.pdf

I've featured 2 types of origami snowflakes here already on Yey! Origami....go use them and decorate your rooms and houses! 

Happy Holidays!

-ABonymous-

Snowflake

4

This is designed by Dennis Walker, with diagrams found in:

http://www.prospero78.freeserve.co.uk/diagrams/snowflake1.gif
http://www.prospero78.freeserve.co.uk/diagrams/snowflake2.gif

with video tutorial by Sara Adams in happyfolding.com

This is a very nice decoration to garnish your home or gifts with in the holidays! (Too bad it does not snow where I live, though. Crap.) The best paper to use in this model is semi-translucent paper (like tracing paper, if your tracing paper is not like what I have here which is so hard to cut and make genderless folds with). Make sure to use paper not TOO thin, but not TOO thick either. There are parts where the model gets too stuffy to fold, and parts where it's vulnerable to ripping its ass off. Even though it looks complex, it is actually easy to intermediate, I guess.

Well, since I cannot find my tracing paper (how many days did I not post?) I used the closest kind to tracing paper: Parchment. It is the type of paper used for the diplomas you love so much and hang it on your favorite wall spot. The paper in the photos above is Parchment. But, as you can see, the pattern is not really evident even when backed up with black paper. When you use tracing paper, it will show more. (I should have bought some, but right now I'm busy buying gifts for my friends...especially the demanding witches...).

Merry Christmas, and Happy Holidays!

-ABonymous-

Flower For Rose

5

This is the "Flower for Rose" designed by Darren Scott with diagrams found in "Everything Origami" (Matthew Gardiner). In my place it is somehow reminiscent of a type of Capiz-made lanterns (Capiz lanterns are shaped like stars supplied with lights that blink with a light interval, forming different light patterns). It is also somehow almost a common design in greeting cards.

Happy Holidays!

-ABonymous-

Pine Cone

6

Good evening! This is an origami Pine Cone designed by David Petty (RIP). I decided to put this in the list since (where I live) pine cones are frequent decorations in Christmas occasions. In my place, the townsfolk paint the cones, stick them with mistletoe leaves and berries, and tie them around the house, with wreaths, or use them as a bouquet for a centerpiece of a table. But there's one problem: there are no pine trees in my place, which is tropical. The only good place for pine trees to grow is in Baguio City, a city way up in the mountains.

So, I decided to include this in the list since people who live in tropical areas can make such models without toiling to get some in the temperate regions (but anyone can still make it!). It's a pretty simple model, with a video tutorial done by Origami Nut (http://www.origaminut.com/58/pine-cone) with diagrams at http://www.davidpetty.me.uk/petty_work/pcone1.htm.But, I guess it's still ok to buy some, right? :D

Merry Christmas and Happy New Year!

-ABonymous-

Sonobe Unit Polyhedra

7

These polyhedric models made of the unit are only four of the COUNTLESS ways on how you can make a model from this unit!

The Sonobe Unit, designed by Mitsunobu Sonobe, is so common that it doesn't have to be published in any book. You can find the diagrams scattered all over the Internet like how Jejemasters are scattered around my neighborhood. (I feel sorry for my neighbors). Permission from him is still required in order to post diagrams on public, though.

Now how is this related to Christmas and it is number 7 on our countdown? SO MANY reasons! Christmas Balls, decorations for your Christmas tree, and many more. You can even build a polyhedron shaped like a pine tree from this unit! (I just don't know how...but it's possible, right?) You can use large units made from wrapping paper and since the models are hollow, you can use the units to wrap a gift for your friends, family, and anyone who is not your enemy...

Happy Holidays!

-ABonymous-

Star Clarissa

8

This is Star Clarissa or Stern Clarissa (German) design by Carmen Sprung with diagrams in Origami: 21 Sterne.

The model uses 8 units, and is a GREAT model for Christmas! Use Christmas-themed colors (like red and green) on paper and make them into a wreath!

Happy Holidays!

-ABonymous

Star Franziska

9

Now the 9th model for our countdown: Franziska Star or Stern Franziska, designed by Carmen Sprung with diagrams published in "Origami: 21 Sterne".

The star in the photos is made from 6 units. You may choose from 5 to 8 units. (I just find the 6-unit star cute...hahaha)

Stella Pitti

PS Note: It has already been a LONG TIME ever since I have posted :P Here is why:
1. Me and my group mates went to Japan to participate in the 2014 Asian International Children's Film Festival to present the Philippines (our film was chosen and it was a privilege!)
2. My pointing finger of my right hand got rotten on the upper part and I had it operated on. Right now I am still taking medications. (It was painful as hell...but of course not as painful as giving birth to a donkey...maybe).
3. SCHOOLWORKS and ASSIGNMENTS....took me AT LEAST A WEEK to finish them all...

Well now you know my rise and eventual fall...2 times....ahahaha

Well, starting with this post, we are starting the 10 DAYS BEFORE CHRISTMAS! In this blog, there will be a countdown with December 15 (today) being number 10 and December 24 (Wednesday) being number 1, with one origami model per day (and can be used as a Christmas decoration or something). Then on December 25 there will be a SUPER SPECIAL POST dedicated to Christmas !


Let the countdown BEGIN!

10

This is Stella Pitti (I don't know where he got the name either), designed by Francesco Mancini, with the diagrams published in a booklet named "Mancinerie" (which is also his screen name). But, when you do not have enough money to buy the booklet, fear not! (wut) I found video instructions by Sara Adams on this model posted on Youtube, and it is through that video I learned making it. A cute model to go with any Christmas Tree! (Especially with foil paper, though I haven't tried it yet)

What do you think is featured as number 9 in the countdown?

Happy Holidays!

--ABonymous--